I'm sure you've seen the Paint Chip Butterfly Project all over the Internet. Here is my version:
First, I made a quick stop to Michael's earlier to grab some more gallery frames (they're 40% off again). While I was hunting down my gallery frames, I sought out the largest butterfly punch I could find. Which wasn't on sale, but I could use my coupon to get 40% off.*
While at Home Depot I grabbed 18 complimentary paint chips; 9 in a blue shade, 9 in a green shade. I found a grouping of colors I liked then just grabbed the 9 consecutive numbers to make sure they were all in the same family. The house has accent colors of both blue and green and I wasn't sure which I wanted to use yet. I decided on a 3x3 design, so I knew I would need 9 paint chips (one for each butterfly).
Paint Chip Butterfly Project cost breakdown:
Paint Chip Samples - Free
Gallery Frame - $15.59
Butterfly Punch - $10.79
Total Project Cost - $26.38
You will also need glue, but only a tiny bit and I happen to have this on hand. While $27 is somewhat pricey for a single project, you can use the butterfly punch for future projects. I plan on re-using this punch in the near future so I didn't think $11 was a bad deal.
Once I gathered all the items I opened up the frame to fit the background paper. I actually used the back of the sample image that was included in the frame. Mine was white and it was the look I was going for. If you didn't want a white background you could either spray paint the sample image with the desired color or measure your frame and buy a sheet of paper from the craft store.
Next, I punched out one butterfly from each paint sample.
I then placed them on the paper with the matting around it so I could decide on which color scheme to use and decide what spacing I liked. Justin and I both preferred the blue accent color for this project. I then lightly folded (with out creasing) each butterfly and set next to the paper so I could individually glue them to the paper. (I used Gorilla Wood Glue. It's what I had on hand - honestly, if I didn't have wood glue, I would've used silicone, or construction adhesive. Any adhesive should work. You're only using a tiny spot).
I decided to keep the glass in place so they don't get disturbed. However, you could choose to go glass-less.
I'm pretty excited for the final product - and this project took me 20 minutes which was mostly spent trying to line up the butterfly punch perfectly. I would recommend not getting the two piece punch; it caused some unnecessary frustration that could have been avoided had I chose the one piece punch.
I'm pretty excited for the final product - and this project took me 20 minutes which was mostly spent trying to line up the butterfly punch perfectly. I would recommend not getting the two piece punch; it caused some unnecessary frustration that could have been avoided had I chose the one piece punch.
I think this would also look great with an accent color in the background and white butterflies (which may give it a more modern feel). And I think a larger variation in colors would be pretty too. This would also be a great art print for a child's bedroom.
Mary
*I never buy anything full price at Michael's, and neither should you. There is a Michael's IPhone app that has updated 40% off coupons so you don't have to clip the newspaper, or in my case, hunt down a newspaper. They can scan the coupon on your phone. No more running to the car for that lost coupon or waiting for an email to download.
No comments :
Post a Comment